UBNT PowerBeam M5, antenna 400mm, 5pack OVERVIEW PowerBeam is based on the former very successful NanoBridge product line. It now includes more powerful hardware and a smarter design. The design has been simplified to the maximum, installation in the field is now faster and more convenient, for the sake of interest I would like to mention the button for releasing the main unit (radiator), which was a problem with the older generation. Inside the PowerBeam is a powerful Atheros 74KC MIPS processor with a frequency of 560MHz, which is supported by 64MB of DDR2 type operating memory and 8MB of Flash memory. The network port supports 10/100/1000 Ethernet and can be powered via the included passive 24V/0.5A Gigabit PoE. Active PoE according to the 802.3af standard is not supported! The theoretical maximum throughput of the unit is 300Mbit (MCS15,802.11n, 2×2 MIMO, at a channel width of 40MHz). SPECIFICATIONS Frequency (MHz): 5170-5875 Standards: 802.11a/n Maximum transmission speed: 300Mbps LAN port: 1x RJ45 10/100/1000Mbps Power supply: 12-24V (PoE only) Wireless operating modes: AP, Client, WDS Operating modes: Bridge, NAT DHCP server/client: Yes/Yes External antenna output: No Other outputs:- Encryption: WPA2 only Minimum Sensitivity: -97 Operating temperature: -40 to 70?C Power regulation: Yes Max. output power: 23dBm Number of antennas: 1 (dual) Beam angle H/V: 8?/8? Antenna gain: 25dBi AirMAX: Yes Chipset: Atheros Processor: MIPS 74KC, 550MHz RAM: 64MB NAND: 8MB Weight: 1.75 kg Operating system: AirOS Supported OS:- IPv6 support: Transparent (bridge mode) Default IP: 192.168.1.20 Default username/password: Ubiquiti/Ubiquiti Outdoor use: Yes Package contents: (x5) emitter PoE psu power cable manual mounting kit for attaching to the mast parabola plastic radiator holder
